LeaflessGutter™ Shield Master Vs. LeafGuard: Gutter Protection Comparison Guide
How Two Of Puget Sound’s Most Popular Gutter Guards Compare In 5 Key Categories.
LeaflessGutter™ Shield Master and LeafGuard are popular gutter protection systems among Puget Sound homeowners. But is one better for Pacific Northwest homes than the other? Or, more specifically… is one better for YOUR home than the other? That’s what you’re about to find out.
LeaflessGutter™ Shield Master and LeafGuard might both be gutter protection systems, but they operate very differently. This article compares the two solutions in five key categories to show you those differences… and help you make the right decision for your home.
Let’s get started.Jump to Table of Contents
LeaflessGutter™ Shield Master Vs. LeafGuard: Type Of System
LeafGuard System Type: Reverse Curve
LeafGuard is a reverse-curve gutter protection system. The top of the cover is 100% solid, which is meant to block debris that comes from directly above it.
Example of a reverse-curve gutter guard.
Reverse-curve gutter guards work based on water tension, gravity, and the capillary action of liquids. Water droplets roll down the solid cover, around the edge of the system’s nose, and into the gutters.
LeaflessGutter™ Shield Master System Type: Sloped Micromesh
LeaflessGutter™ Shield Master is an all-metal, sloped micromesh gutter protection system. The micromesh screen lets water flow into your gutters while blocking even the smallest debris.
LeaflessGutter™ Shield Master is a sloped micromesh gutter guard.
Unlike reverse-curve systems, micromesh gutter guards allow water to enter your gutters directly from the top of the cover instead of the side. So, which system is better at letting in water while keeping out debris—LeafGuard’s reverse curve or LeaflessGutter™ Shield Master’s sloped micromesh?
Let’s take a look.
Jump to Table of Contents
LeaflessGutter™ Shield Master Vs. LeafGuard: Water Management
LeafGuard Water Management
Reverse-curve gutter guards like LeafGuard work exceptionally well… in controlled environments. As mentioned above, reverse-curve systems work based on water tension and the capillary action of liquids. It’s a fine method—as long as you don’t break the surface tension on the cover. Unfortunately, unbroken surface tension only occurs when you have a controlled (set amount) of water flowing into the gutter. In the Puget Sound area, we get vastly different rates of rainfall: one day it’s a drizzle; the next day, it’s a downpour. This causes the following issues with reverse curve systems like LeafGuard:
- Increased rainfall means increased water flow, which breaks the surface tension and allows water to pour over the gutters.
- Less rainfall means insufficient water flow to adequately remove the debris. Without sufficient force, debris gets hung up in the opening and blocks any and all water from passing inside.
LeaflessGutter™ Shield Master Water Management
LeaflessGutter™ Shield Master is the only micromesh system installed on a slope. It’s the only gutter guard that works at the same angle as your roof. This allows LeaflessGutter™ Shield Master to handle THE heaviest rains Mother Nature can throw at it. LeaflessGutter™ Shield Master’s technology sucks water down into the filter. Even though the holes in LeaflessGutter™ Shield Master gutter guards are only half the width of your hair, they are shaped such that each one forms a miniature whirlpool that siphons water into the gutter, no matter how much rain there is.But LeaflessGutter™ Shield Master’s innovative water-management technology doesn’t stop there. It also comes with a groundbreaking system to eliminate unsightly “stripes” on your gutters. With other gutter guards, dirty rainwater runs over the front of the gutters and creates ugly streaks. LeaflessGutter™ Shield Master’s angled surface and gasket system prevent these streaks from forming. The result is better-looking gutters… and a better-looking HOME.
Jump to Table of Contents
LeaflessGutter™ Shield Master Vs. LeafGuard: Clog Protection
LeafGuard Clog Protection
In theory, a reverse-curve gutter guard seems like a surefire way to keep out leaves and debris. After all, how can debris penetrate a solid hood? The reality, however, is different. Once again, water tension comes into play… and not in a good way. Small debris (like fir needles) gets swept up by flowing water and carried directly into your gutters. Watch this 40-second video to see how reverse-curve technology actually feeds your gutters debris:
The result? Clogs like this…
Clogged reverse-curve: Exhibit A.
And this…
Clogged reverse-curve: Exhibit B.
Bottom line: A reverse-curve system’s appetite for small foliage is a big problem—one that can cause major water damage to your home.
LeaflessGutter™ Shield Master Clog Protection
Many gutter covers—regardless of the type—have trouble shedding wet debris. Leaves and needles stick to the cover’s surface. With micromesh systems, this debris will build up over time and cause clogs. With reverse-curve systems, the debris will eventually find its way into your gutters. LeaflessGutter’s LeafRelease™ non-stick surface eliminates this issue by allowing debris to dry and blow away faster. LeaflessGutter™ Shield Master is made with a 316 surgical-grade stainless steel microfilter that blocks out even those small, pesky pine needles. In fact, nothing but water can get through a LeaflessGutter™ Shield Master-protected gutter!
Access denied!
LeaflessGutter™ Shield Master even solves a common issue with micromesh systems: clogged screens. With the average micromesh gutter cover, the small holes in the screen can become plugged up with oil, dirt, and microorganisms. LeaflessGutter™ Shield Master eliminates this with a revolutionary copper-wire system:
LeaflessGutter™ Shield Master self-cleans with copper technology.
Copper, which attacks bacteria and oil, is woven directly into the micromesh screen. Copper ions break down and actually kill algae, mold, mildew spores, and other elements that can potentially clog the screen.
Jump to Table of Contents
LeaflessGutter™ Shield Master Vs. LeafGuard: Installation
LeafGuard Installation
It’s important to note that LeafGuard is actually a complete gutter system. It comes with the cover, eaves, downspouts… everything. This means you cannot install it on your existing gutters; you must remove your current gutter system. Naturally, this makes LeafGuard more expensive than stand-alone gutter guards. LeafGuard is advertised as working with all roof types and pitches. Since it’s mounted away from your shingles, you won’t have to worry about LeafGuard affecting your roof’s warranty.
LeaflessGutter™ Shield Master Installation
LeaflessGutter™ Shield Master is a stand-alone gutter cover. If your current gutters are in good shape, LeaflessGutter™ Shield Master can be installed right on them. (And if you do need new gutters, we’ve got you covered!) As for your roof’s warranty? It remains 100% intact. LeaflessGutter™ Shield Master is installed with a cutting-edge method, so it “floats” between the starter shingles and the first row of main shingles. Zero fasteners are used on your actual roof. The weight of the shingles is sufficient to press down on the back of LeaflessGutter™ Shield Master and locks it firmly in place. In fact, four of the largest shingle manufacturers — GAF, CertainTeed, Owens Corning, and IKO — have gone on record and approved LeaflessGutter™ Shield Master installation for their roofing systems. Take a look…Owens Corning + LeaflessGutter™ Shield Master
CertainTeed + LeaflessGutter™ Shield Master
GAF + LeaflessGutter™ Shield Master
IKO + LeaflessGutter™ Shield Master
Jump to Table of Contents
LeaflessGutter™ Shield Master Vs. LeafGuard: Product Warranty
LeafGuard Warranty
LeafGuard’s lifetime no-clog warranty follows the industry standard. The warranty does NOT guarantee clog-free gutters. It states that when your gutters do get clogged (and they probably will), a LeafGuard representative will remove the clog for free. It typically takes gutter guard companies a week or two to service clogs, so you’re stuck with plugged-up gutters until then.
LeaflessGutter™ Shield Master Warranty
LeaflessGutter™ Shield Master comes with a TRUE Lifetime No-Clog Guarantee. If your gutters ever clog while LeaflessGutter™ Shield Master is protecting them, you can choose to receive either a replacement system or a full refund of the product cost. But your peace of mind doesn’t stop there. Should the clog cause damage claimable against your homeowner’s policy, you’ll be refunded your insurance deductible up to $1,500. Should you sell your home, LeaflessGutter™ Shield Master’s Lifetime No-Clog Warranty fully transfers to the next owner. It’s an excellent way to increase your home’s resale value.Get A Free Gutter Guard Quote In Puget Sound
Want clog-free gutters for LIFE? Contact Leafless In Seattle for your free quote on the best gutter protection in Puget Sound. We serve Seattle, Kent, Tacoma, and the surrounding areas. It would be an honor to speak with you!See More Gutter Guard Comparisons
Gutter Issues? No Problem.
If you need roofing services, gutter protection, new gutters, or any other home improvement services...we would be honored to help. Just give us a call at 1-800-503-7597 or schedule an appointment with us online.